Replacing windows in your home can enhance its appearance, energy efficiency, and overall comfort. While professional window installers can handle the entire process, homeowners can also take their own measurements to ensure they receive a quote fast and start the process as soon as possible. This article serves as a step-by-step guide to help homeowners accurately measure their windows for replacement.

  1. Gather the Necessary Tools: Before you begin, make sure you have the following tools readily available:
  1. Identify Window Types: Determine the types of windows you need to replace. Common window styles include single-hung, double-hung, casement, awning and sliding windows. Each type may require slightly different measurement techniques, so it’s essential to be aware of the specific window style you’re working with.
  2. Measure Width: To measure the width accurately, follow these steps:
  • Open the window fully.
  • Measure the width between the inside edges of the window frame at three different points: top, middle, and bottom.
  • Note down the smallest measurement of the three. This ensures the new window will fit properly.
  1. Measure Height: To measure the height correctly, perform the following steps:
  • Measure the height between the inside edges of the window frame at three different points: left, middle, and right.
  • Record the smallest measurement of the three. This guarantees that the new window will fit perfectly.
  1. Measure Depth: Measuring the depth of the window frame is crucial to ensure a proper fit for replacement windows. Follow these steps:
  • Measure the depth from the inside edge of the window frame to the outer edge.
  • Measure at three points: top, middle, and bottom.
  • Record the smallest measurement.
  1. Check for Squareness: To verify if your window frame is square, measure the diagonals of the window opening:
  • Measure the diagonal from the top left corner to the bottom right corner.
  • Measure the diagonal from the top right corner to the bottom left corner.
  • If the two measurements are not the same, it indicates that your window opening is not perfectly square. In such cases, it is advisable to consult a professional to ensure accurate measurements.
  1. Consider Additional Measurements: Depending on the type of window and your preferences, you may need to take additional measurements, such as:
  • Trim measurements: Measure the width and height of any existing trim around the window.
  • Jamb depth: Measure the width of the window frame from the interior side jamb to the exterior side jamb.
  1. Double-Check and Record: Review your recorded measurements to ensure accuracy. It is always better to double-check and avoid any measurement errors that might lead to ill-fitting windows.
  2. Send us your Measurements: You can share us the excel template or a picture of it via text message/whatsapp to (786) 400-2780, or by email to: info@onewellwindows.com

By following these steps and taking accurate measurements, homeowners can confidently obtain a quote for replacement windows. Remember, precision is essential to ensure a proper fit and a successful project. If you are unsure about any aspect of the measuring process, contact us for for assistance. Taking the time to measure your windows correctly will result in windows that fit seamlessly.


When it comes to windows in Miami-Dade County, homeowners often come across the term “NOA.” But what does NOA actually stand for, and why is it important? Let’s dive into the world of building regulations and discover the significance of NOA in Miami-Dade County.

NOA stands for Notice of Acceptance. In Miami-Dade County, which is located in the state of Florida, the building code is governed by some of the strictest regulations in the country. This is primarily due to the area’s vulnerability to extreme weather conditions, such as hurricanes. To ensure the safety and resilience of structures, including windows, Miami-Dade County has established stringent building codes that must be adhered to.

When it comes to windows, the NOA is a crucial document. It serves as proof that a particular window or window system has undergone rigorous testing and has been approved for use in Miami-Dade County. These tests evaluate the window’s ability to withstand high wind speeds, impact resistance from flying debris, and water infiltration.

The process of obtaining an NOA involves submitting the window or window system to an accredited testing laboratory. The laboratory performs a series of tests that simulate hurricane conditions to assess the window’s performance. If the window passes these tests and meets the required standards, the manufacturer receives a NOA, which indicates that their product is approved for use in Miami-Dade County.

Homeowners in Miami-Dade County should prioritize selecting windows that have a NOA. This ensures that their chosen windows have been specifically designed and tested to withstand the severe weather conditions commonly experienced in the area. Additionally, having windows with a NOA is often a requirement for obtaining homeowner’s insurance or meeting building code regulations during construction or renovation projects.

To verify if a window has an NOA, homeowners can check the Miami-Dade County’s website or contact the manufacturer directly. It’s important to note that a NOA is specific to a particular window or window system, so even if a manufacturer has received a NOA for one of their products, it doesn’t automatically apply to their entire product line.

For a list of NOA’s issued by the Miami-Dade county, please visit the link below:

Miami-Dade county NOA’s issued for windows category


As a homeowner, keeping your property in excellent condition while also lowering your electric bill are top priorities. One aspect that can greatly contribute to both goals is replacing old, inefficient windows. Not only does this upgrade enhance the aesthetic appeal of your home, but it can also result in substantial cost savings. In addition to the monetary benefits, homeowners who opt for window replacements may be eligible for a tax credit.

Understanding Clean Energy Tax Credits:

The Internal Revenue Service (IRS) offers tax credits for various clean energy upgrades, including window replacements. These tax credits allow homeowners to recoup a percentage of the costs incurred during qualifying improvements, ultimately reducing their tax liability. The eligibility and credit amounts are subject to change, so homeowners should stay updated on the latest IRS guidelines. Here are the key highlights regarding window replacements:

  1. Eligible Products: To qualify for the tax credit, homeowners must install energy-efficient windows that meet specific criteria outlined by the IRS. These criteria typically include windows with Energy Star certification, which ensures they meet or exceed energy efficiency standards established by the Environmental Protection Agency (EPA). It is essential to consult the Energy Star Most Efficient requirements or visit the Energy Star website for the latest specifications.
  2. Tax Credit Amount: The tax credit amount available for window replacements has been updated for the 2023-2032 tax years. Homeowners can now claim a tax credit equal to 30% of the cost of eligible windows, up to a maximum of $600. This means that if the total cost of window replacements is $2,000, homeowners can receive a tax credit of $600.
  3. Annual and Lifetime Limits: While the tax credit provides a valuable opportunity to reduce expenses, it is important to note that there are annual and lifetime limits in place. Homeowners can claim the tax credit for windows up to a maximum of $600 per year. Additionally, the tax credit for windows, along with other eligible energy-efficient improvements, falls under the $1,200 lifetime cap.
  4. Filing Process: To claim the tax credit, homeowners must complete IRS Form 5695, following the instructions provided by the IRS. This form should be included when filing the annual tax return, along with relevant product receipts as proof of purchase.

For more information visit the links below:

U.S Department of Energy: Making Our Homes More Efficient: Clean Energy Tax Credits for Consumers

IRS frequently asked questions about energy efficient home improvements and residential clean energy property credits

ENERGY STAR Most Efficient 2023


Replacing windows is a significant decision for homeowners, and it’s essential to understand the different types of glass available to make an informed choice. Glass plays a crucial role in energy efficiency, safety, and overall comfort within your home. In this article, we will explore the key differences between tempered glass, laminated glass, insulated glass, low-emissivity (Low-E) glass, and other specialized types, helping you make the right selection for your window replacement project.

  1. Tempered Glass: Tempered glass is a popular choice for homeowners seeking enhanced safety. It undergoes a thermal process that strengthens it, making it more resistant to impact and thermal stress. When broken, tempered glass shatters into small, harmless pieces, minimizing the risk of injury. Consider installing tempered glass in areas where safety is a priority, such as doors, large windows, and areas prone to accidental impacts.
  2. Laminated Glass: Laminated glass offers both safety and additional benefits. It consists of two or more glass layers sandwiched around a resilient interlayer, typically made of PVB (Polyvinyl butyral) or EVA (Ethylene-vinyl acetate). When broken, the glass adheres to the interlayer, preventing scattering and reducing the risk of injury. Laminated glass also provides sound insulation, blocks UV radiation, and enhances security by making it harder for intruders to penetrate the glass.
  3. Insulated Glass: If energy efficiency and thermal comfort are important to you, insulated glass, also known as double-glazed or double-pane glass, is an excellent choice. It consists of two glass panes separated by a spacer, which is sealed around the edges. The space between the panes is filled with air or gas, improving thermal insulation and reducing condensation. Insulated glass helps maintain a consistent indoor temperature, reduces energy costs, and minimizes noise transmission from the outside.
  4. Low-E Glass: Low-emissivity (Low-E) glass is designed to control heat transfer and improve energy efficiency. It features a thin, transparent coating applied to the glass surface that reflects heat, keeping the interior cool in summer and warm in winter. Low-E glass also blocks a significant portion of harmful UV radiation, protecting your furnishings from fading. There are different types of Low-E coatings available, with varying performance and durability.
  5. Specialized Types of Glass: Apart from the aforementioned options, there are various specialized glass types available for specific applications:
  • Frosted or Obscured Glass: Ideal for maintaining privacy while allowing light transmission.
  • Tinted Glass: Reduces the transmission of light and heat, providing additional privacy and solar control.
  • Wired Glass: Offers increased strength and fire resistance, commonly used in fire-rated applications.
  • Bulletproof Glass: Provides high-level security against projectiles and is composed of multiple layers of glass and resilient materials.
  • Fire-Rated Glass: Specifically designed to resist the spread of fire and smoke, ensuring safety in case of emergencies.

At One Well Windows, our team of professionals can help you assessing your needs and budget, and will provide you expert guidance on selecting the most suitable glass type for your window replacement project.


Replacing windows can be a significant investment for homeowners, but it’s one that can improve energy efficiency, increase curb appeal, and even boost property values. However, many homeowners are hesitant to take on the expense of window replacement, and may not know where to turn for financing options.

Fortunately, there are several options available to homeowners looking to finance their window replacement project, which could indeed be a good idea. In this article, we’ll explore the different options for window replacement financing, including options through PACE programs and other regular consumer financing options.

  1. PACE Programs

PACE (Property Assessed Clean Energy) programs are a financing option for homeowners to pay for energy-efficient improvements to their homes through their property tax bill. PACE programs are available in many states and cities, and can be used to finance window replacement projects.

To participate in a PACE program, homeowners must meet certain eligibility requirements and have their home assessed for energy efficiency. The cost of the window replacement project is then added to the homeowner’s property tax bill, and repaid over time through their property taxes. PACE programs typically offer low-interest rates, long repayment terms, and no money down, making them an attractive option. We can help you with your application so you don’t have to worry about anything!

It’s important to note that with financing through PACE programs, a lien is placed on the property to secure the debt. This means that if the homeowner fails to repay the PACE assessment, the lien holder (usually the government or a private lender) has the right to foreclose on the property.

On the other hand, PACE assessments are senior liens, which means they take priority over other liens on the property, including mortgages. This can make it difficult to refinance or sell the property until the PACE assessment is paid off. Homeowners should carefully consider the potential impact of a PACE assessment on their property before participating in the program. It can be a valuable option but Homeowners should weigh the potential benefits and drawbacks of PACE financing, and consider their financial situation and goals before deciding if it’s the right option for them.

2. Weatherization Assistance Program (WAP)

The WAP in Florida is a vital initiative aimed at helping low-income homeowners enhance the energy efficiency of their homes. The program provides eligible households with a range of services, including window installations, insulation, sealing air leaks, and upgrading heating and cooling systems.

The specific benefits provided by the WAP in Florida can vary based on several factors such as the homeowner’s income, the type of improvements needed, and the available funding. To obtain detailed and accurate information about the benefits in Miami-Dade County, contact community action and human services. They can assess your eligibility, evaluate your home’s needs, and provide personalized information about the available assistance and benefits tailored to your specific situation.

3. Personal Loans

Personal loans are a common financing option for homeowners looking to fund home improvement projects, including window replacement. Personal loans are typically unsecured, meaning they don’t require collateral, and can be used for any purpose.

Personal loans are available through banks, credit unions, and online lenders, and offer fixed interest rates and set repayment terms. Personal loans can be a good option for homeowners who have good credit and a stable income, and want to finance their window replacement project without using their home as collateral. We can also help you showing you the best options!

4. Home Equity Loans

Home equity loans are another financing option for window replacement projects. Home equity loans are secured by the equity in the homeowner’s property, and typically offer lower interest rates than personal loans. Home equity loans can be obtained through banks and credit unions, and offer fixed interest rates and set repayment terms. Home equity loans can be a good option for homeowners who have a significant amount of equity in their home, and want to finance their window replacement project with a low-interest, fixed-rate loan.

5. Credit Cards

Credit cards can be used to finance window replacement projects, but they typically offer higher interest rates than personal loans or home equity loans. Credit cards can be a good option for homeowners who have a small window replacement project, or who plan to pay off the balance quickly. Some credit cards offer promotional financing, such as 0% APR for a set period of time, which can be a good option for homeowners who can pay off the balance before the promotional period ends.

6. Manufacturer Financing

We do offer financing options for homeowners purchasing their windows. Manufacturer financing can be a good option for homeowners who want to purchase high-quality windows but may not have the funds to pay for them upfront. We can offer lower interest rates than other financing options through a third-party financing company.

We understand that replacing windows can be a significant investment for homeowners, but there are several financing options available to make it more manageable. PACE programs offer a low-interest, long-term repayment option for energy-efficient window replacement projects. Personal loans, home equity loans, and credit cards are also available for financing window replacement projects, each with their own pros and cons. Allow us to help you explore all the financing options and choose the option that best fits you financial needs and goals.


Windows are an important part of any home, providing natural light, ventilation, and aesthetic appeal. But over time, windows can become worn, damaged, or outdated, and may need to be replaced. In this post, we’ll explore some signs that it’s time to replace your windows.

  1. High Energy Bills

If you notice a steady increase in your energy bills, it could be a sign that your windows are no longer energy efficient. Older windows may have leaks or drafts that allow air to escape, making your heating and cooling systems work harder and causing your energy bills to go up.

  1. Difficulty Opening or Closing

If you find it difficult to open or close your windows, it may be time to replace them. Over time, windows can become warped or damaged, making them hard to operate. This can be frustrating and also pose a safety hazard in case of an emergency.

  1. Visible Damage

If you notice visible damage to your windows, such as cracks, chips, or decayed frames, it’s important to address the issue promptly. Damaged windows not only look unsightly but can also compromise the structural integrity of your home and pose a safety risk.

  1. Outside Noise

If you notice that outside noise is more noticeable than it used to be, it could be a sign that your windows are no longer providing adequate sound insulation. Newer windows are designed with sound insulation features that help reduce outside noise and make your home a more peaceful place to live.

  1. Outdated Appearance

If your windows look outdated and do not match the aesthetic of your home, it may be time to update them. Replacing your windows with newer, more modern styles can improve the overall look and feel of your home and increase its value.

Replacing your windows can be a significant investment, but it’s often necessary to ensure the safety, comfort, and energy efficiency of your home. If you notice any of the signs mentioned above, it may be time to consider replacing your windows.


If you live in Miami, Florida, you know all too well the impact that hurricanes can have on your home. One way to protect your home and your family during hurricane season is by installing hurricane-resistant windows. But how much do these windows cost, and are they worth the investment? In this article, we’ll explore the benefits and estimated costs of hurricane-resistant windows in Miami.

Benefits of Hurricane-Resistant Windows

Hurricane-resistant windows are designed to withstand the impact of high winds and flying debris during a hurricane. They are made with impact-resistant glass and a strong frame that can withstand winds of up to 200 mph. Here are some of the benefits of hurricane-resistant windows:

  1. Protection: Hurricane-resistant windows provide a high level of protection against damage from hurricanes, helping to keep your home and family safe during a storm.
  2. Energy Efficiency: Many hurricane-resistant windows are designed with energy efficiency in mind, helping to reduce your energy bills and keep your home comfortable year-round.
  3. Noise Reduction: Hurricane-resistant windows can also help reduce outside noise, making your home a quieter, more peaceful place to live.
  4. Increased Home Value: Installing hurricane-resistant windows can increase the value of your home, making it more attractive to potential buyers in the future.

Estimated Costs of Hurricane-Resistant Windows

The cost of hurricane-resistant windows can vary depending on a number of factors, including the size of the window, the type of frame, and the level of impact resistance needed. In general, hurricane-resistant windows cost more than traditional windows, but the added protection can be worth the investment.

Here are some estimated costs for hurricane-resistant windows in Miami:

  • Single-hung: $600-$1,000 per window
  • Double-hung: $700-$1,200 per window
  • Casement: $800-$1,500 per window
  • Sliding: $900-$1,800 per window

Keep in mind that these are rough estimates and that the actual cost will depend on a variety of factors. To get a more accurate estimate request a consultation.

Hurricane windows can provide a high level of protection for your home during hurricane season. While they may cost more than traditional windows, the benefits they provide can be well worth the investment. If you’re considering installing hurricane-resistant windows in your Miami home, be sure to contact us for an estimate.


There are many types of windows, but some of the most common types include:

  1. Single-hung windows: These windows have a fixed top sash and a bottom sash that can be opened by sliding it up.
  2. Double-hung windows: These windows have two sashes that can be moved up and down independently.
  3. Casement windows: These windows are hinged on one side and swing outward when opened, usually operated by a crank.
  4. Awning windows: These windows are hinged at the top and swing outward when opened, typically operated by a crank.
  5. Sliding windows: These windows have one or more sashes that slide horizontally along tracks.
  6. Bay windows: These windows extend outward from the wall and typically have a central picture window flanked by two smaller windows.
  7. Bow windows: Similar to bay windows, but with a more rounded shape.
  8. Picture windows: These windows are fixed and do not open, often used for providing a view or natural light.
  9. Transom windows: These narrow windows are typically located above doors or other windows to provide additional light and ventilation.
  10. Skylight windows: These windows are installed in the ceiling or roof and provide natural light from above.

The type of window that’s best for your home will depend on factors such as your design preferences, energy efficiency needs, and the amount of ventilation you require.